Fluonics Co., Ltd.
5 1

PFA Lined Fitting, Lined Pipe

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Browse by Category

You may also be intersted in
ball valveplug valve

Contact us

Fluonics Co., Ltd.
[Korea]

Address
561-11, Gwanggyeok-ri, Hojeo-myeon, Wonju-si, Gangwon-do
Phone
82-33-7313550
Contact name
Wang-sung, Lee

Quick Information

  • Place of Origin: Korea

Description

Lining Materials

PFA
PFA exhibits thermal characteristics like to PTFE, being able to withstand super low to high temperatures (260°C Maximum temp. for continuous use). It is also transparent and mechanically strong under high temperature. It is easily workable besides applicable with extrusion molding to the same degree as general thermoset plastics. It is used where purity is important, such a semiconductor wafer baskets, piping couplings and non-corrosive linings. PFA has better mechanical strength at high temperatures than FEP, and excellent moldability for easy processing by extrusion, compression, blow, transfer and injection molding methods. Due to the high bonding strength of the carbon, fluorine and oxygen atoms, PFA demonstrates nearly the same outstanding capabilities as PTFE in temperatures ranging from -200°C to +260°C.

FEP
FEP is a copolymer for tetrafluoroethylene and hexafluoropropylene. FRP consists of carbon atoms and fluorine atoms, as does PTFE, and has a molecular structure in which one of the fluorine atoms bonded to the carbon atoms. FEP has a lower melt viscosity than PTFE and can be processed like other molten thermoplastic resins by extrusion, transfer, injection, and compression molding. Because the bonding energy between its carbon and fluorine atoms is so high, and because the carbon chain is completely surrounded by fluorine atoms, FEP fluorocarbon polymer retains excellent thermal, electrical, and chemical stability. Therefore, it shows high performance in electrical, chemical, and medical applications in temperatures ranging from extremely low to extremely high (-200°C ~ +200°C / -328°F ~ +392°F).

PTFE
The fluorine atoms completely cover the carbon chain backbone and protect the carbon-carbon bond from attack. The fluorine atoms are also responsible for the low surface energy and exceptional frictional characteristics of PTFE. Because of very high melt viscosity, PTFE does not flow above its melting point. It requires special polymer processing like paste extrusion, compression molding and sintering. Among all the fluoroplastics products, PTFE offers the highest heat resistances at 260°C (maximum temp. for continuous use). It is not corroded by most chemicals and has good electrical insulation and dielectric characteristics. Moreover, it has a unique non-stick property and the lowest coefficient of friction amongst solids. It is the most widely used fluoroplastics, now found in O-rings, gaskets, bearing, tube, wiring, hot plates and irons because of its non-stick property, as well as chemical tank linings.

Property
PFA
FEP
PTFE
Testing
Method
Value
Unit
Testing
Method
Value
Unit
Testing
Method
Value
Unit
Specific
Gravity
ASTM
D-330
2.14~2.16
-
ASTM
D-2116
2.12~2.17
-
ASTM
D-3307
2.14~2.20
-
Melt Flow
Rate
ASTM
D-330
7~8
g/10 min
ASTM
D-2116
6
g/10min
-
-
-
Melting
Point
ASTM
D-330
304
°C
ASTM
D-2116
260
°C
ASTM
D-3307
327
°C
Tensile
Strength
ASTM
D-330
33.3
(4835)
MPa
(psi)
ASTM
D-2116
31
MPa
(psi)
ASTM
D-3307
13.7~34.3
(1990~4980)
MPa
(psi)
Elongation
ASTM
D-330
420
%
ASTM
D-2116
370
%
ASTM
D-3307
200~400
%
Chemical
resistance
-
Excellent
 
ASTM
D-2116
Excellent
 
-
Excellent
_

Pipe

Ordering information

90° Elbow

Ordering information

45° Elbow

Ordering information

EQUAL Tee

Ordering information

Reducing Tee

Ordering information

Concentric Reducer/Eccentric Reducer

Ordering information

Instrument Tee

Ordering information

Expansion Joint

Ordering information

PFA Tube


Product Image

  • PFA Lined Fitting, Lined Pipe image

Related products from premium suppliers on EC21

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Wang-sung, Lee
Fluonics Co., Ltd.
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Pipe Fittings
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.